Aeration Systems: Centrifugal Fans

Centrifugal Fan

Boone Aeration & Environmental high-pressure Centrifugal fans are ideal for situations involving temporary wet grain holding, deep storage, or where ever high static pressures are required.

Ten gauge or heavier steel housing and non-overloading, vibration-proof fan wheels make Boone Aeration & Environmental grain aeration fans TOUGH. When these features are combined with low power consumption and ample air delivery, the result is low-cost, efficient aeration for almost any application.

Features

  • Fan wheels are welded to prevent loosening, and are statically and dynamically balanced for smooth, trouble free operation.
  • Fan wheels are direct-connected to motor shafts to eliminate belt fatigue and drive failure problems.
  • Taper-lock bushings are used to secure fan wheels to motor shafts, so fan wheel removal is simplified.
  • Flanged outlets and extended inlet collars provide strong connections and simple installation.
  • Specially designed inlet cones improve fan performance by providing smoother inlet airflow for steady, even, air delivery.

All motors are nominal 3450 RPM, and are available in open ball-bearing, totally enclosed fan-cooled, or Class II, Group ‘G’ explosion-proof models.

2000, 2200, 2400, 2700, 3000, 3300, 3600, 4000

2000 Series
20-inch fan wheel
5, 7 ½, 10, 15, and 20 horsepower motors

2200 Series
22-inch fan wheel
15, 20, 25, 30, 40 and 50 horsepower motors

2400 Series
24-inch fan wheel
60 & 75 horsepower motors

2700 Series
7 ½, 10, 15 and 20 horsepower motors

3000 Series
22-inch fan wheel
15, 20, 25, 30, 40 and 50 horsepower motors

3300 Series
25, 30, and 40 horsepower motors

3600 Series
60 & 75 horsepower motors

4000 Series
Up to 100 horsepower motors

About Us

Rolfes @ Boone, located on the east edge of Boone, Iowa, began business operations on April 1, 1994. Boone Cable Works & Electronics is employee owned and is a full-line manufacturer of grain termperature detection and hazard detection equipment. All design, engineering, manufacturing, and sales functions are performed "in-house" in our 22,500 square foot facility.

Certified And Proud Member

Hotpsot